****************************** ** FIRMWARE RELEASE NOTES ** ****************************** Date: December 14, 2000 Filename: dub02-f.txt Products: XP4000 XPDU cards (P/N: 600-283) Revision: B-02 Status: released ============================================================================== Notational Conventions ====================== Convention Key Sequence or Value ----------- -------------------------------------------------------------- Enter Command Mode: 1. Press and hold down the 'Num Lock' key. 2. Press and release the minus (-) key on the numeric keypad. 3. Release the 'Num Lock' key. NOTE: For alternate command mode key sequences, refer to your AutoBoot 1xP & 4xP Installer/User Guide. Press the 'Enter' or 'Return' key. The command is used to execute an instruction and exit Command Mode.
A valid channel address entered as an optional chassis address ('1' through '254') followed by a channel address ('A' through 'N'). Examples: 'A' Channel A in the local chassis '12B' Channel B in chassis number 12 Press the 'Escape' key. The command is used to exit Command Mode without executing an instruction. Functional Changes From Released Revision B-00 ============================================== * Corrected a problem that caused cascaded AutoView channels to not be transferred correctly between XPDU cards, or using the OSD utility. * Corrected a problem that caused the loss of the user list when transferring a channel list between XPDU cards, or to a PC using the OSD utility. * Added messages to notify the user why a channel selection fails. Availability ============ The FLASH image is available as... URL: This file is available as... URL: